KStrong® Wire Cable Sling, 3 ft. length, PVC Coated. Choker “Pass Thru” Style with Large O-ring at one end and Small O-Ring at other end (ANSI) Key Features DESIGN: Made of PVC coated Galvanised steel wire rope anchorage sling having one side Forged O-ring...

DESIGN: Single point anchor is designed to be fixed on walls, ceilings, roof tops or steel structures. It can be used to sustain the load impact in all three axes (X, Y, & Z). NO. OF USERS: 1 Maximum MATERIAL: Alloy Steel; Finish: Silver/golden...

Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistance Appropriately sized alloy steel D-rings provide simple pass-through choke-on installation. May be passed-through multiple times to shorten length Smaller D-ring facilitates connection point for SRLs and lanyards Each D-ring termination features...

D-ring assembly rotates 360° and pivots 180° User-suppled fasteners required Features 10,000 lb static strength Complies with ANSI Z359.18-2017 Plated alloy steel; 5,000 lb min. static strength D-ring 5,000 lb min. Static Strength 130 to 310 lb max. ANSI User Capacity 130 to 425 lb max. OSHA User...

Features threaded aluminum crossbar and jaws with knurled rings for fine adjustment Exclusive recessed under-jaw ball bearings provide improved mobility. Fits beam flanges from 3" to 12-1/4" wide and up to 1" thick For temporary mobile use on horizontal I-beams Complies with ANSI Z359.18-2017...

Simple, lightweight design is easy to install and reusable Fits 1-5/8" wide strut material Features twin stainless steel plate design with plated alloy carabiner Provides horizontal mobility along overhead strut material Complies with ANSI Z359.18-2017 Type A

Features single trolley adjustment and threaded steel crossbar Includes steel wheels, side plates and adjustment rings. Fits beam flanges from 3" to 8" wide and up to 2-1/4" thick For temporary or permanent installation on overhead horizontal I-beams Complies with ANSI Z359.18-2017

Features aluminum crossbar and steel clamping jaws with nylon slider pads Fits beam flanges from 3" to 14-1/2" wide and up to 1-1/4" thick. Single adjusting jaw includes concealed locking latch Alloy steel D-ring slides with jaw adjustment For temporary mobile use on horizontal...

he KStrong® Bully™ Swivel 10K Anchor for metal structures is a high-strength anchor designed to provide maximum safety and security for those working at height. This anchor features a 5/8-inch hex head bolt that is 4 inches long, along with a nut and washer...

Features forged eye connection point for 7/16" size shackle Requires 1" +/- 1/16" hole diameter Zinc plated forged alloy steel construction For temporary use in steel structures, including I-beams for catenary line anchorage systems Complies with ANSI Z359.18-2017 Plated forged alloy steel Drop-In Anchor Static...

Features 2" x 4-1/2" unplated alloy steel anchoring plate and plated steel D-ring Plain steel anchoring plate is ideally suited for permanent weld-on installation. 1/2" holes also provided for bolt-on fixed position installation Complies with ANSI Z359.18-2017 Installation Plate Unplated alloy steel D-ring Plated alloy; 5,000...

Features aluminum crossbar and steel clamping jaws with nylon slider pads Fits beam flanges from 3" to 14" wide and up to 1-1/4" thick. Dual adjusting jaws include concealed locking latches Alloy steel D-ring remains centered on crossbar For temporary mobile use on horizontal...

Hard-wearing 1/4" vinyl coated galvanized steel cable tolerates demanding work environments Conveniently sized 2" and 3" alloy steel O-rings provide simple pass-through choke-on installation. Smaller O-ring facilitates connection of SRL or lanyard Assembled with steel thimbles and swaged aluminum ferrules Vinyl coating adds a...

D-ring assembly rotates 360° and pivots 180° Includes weld-on puck and Grade 8 installation bolt. Features 10,000 lb static strength Complies with ANSI Z359.18-2017 Plated alloy steel; 5,000 lb min. static strength D-ring Unplated alloy steel Puck 5,000 lb min. Static Strength 130 to 310 lb max. ANSI...

A removable and reusable anchor designed for overhead applications. Cable length is 6 ft. Key Features APPLICATION: Concrete / Steel COLOR: Yellow LOADING: 5,000-lbf (22kN) LENGTH: 6 FT PLATE SIZE: 4 in SPECIFICATIONS: UTS : 5,000-lbf / 22kN | Max User Weight : 310-lbs / 140kg | Working...

KStrong® Bolt-on steel two hole d-ring anchor. Key Features DESIGN: Anchor plate with ‘D’ ring can be easily installed on the structure with help of M12 chemical as well as mechanical fasteners. Easy to install, light in weight & is reusable. The D-Ring can...

DESIGN: Girder steel anchor is removable/ reusable anchor to be mounted on solid steel structures, Girders and steel I-Beams. Can be installed very easily with one hand only. Maximum thickness of the structure on which installation is possible is 1.57” (40mm). USAGE: For use...

KStrong® Aluminum and Steel Rolling Beam Anchor, adjustable to fit I-beams with flange widths ranging from 3.14” – 9.84” (ANSI) Key Features DESIGN: Anchor capable of being installed on flange of beams. Adjustment of the jaw to variable positions enables it to be installed...

Adjustable to fit I-beams with flange widths ranging from 3” to 6”. (ANSI) Key Features DESIGN: Anchor capable of being installed on flange of beams. Adjustment of the jaw to variable positions enables it to be installed to varying flange widths. MIN FLANGE WIDTH...

Adjustable to fit I-beams with flange widths ranging from 3.5” to 14” (ANSI) Key Features DESIGN: Anchor capable of being installed on flange of beams. Adjustment of the jaw to variable positions enables it to be installed to varying flange widths. MATERIAL: Aluminum Alloy...