KStrong® Wire Cable Sling, 3 ft. length, PVC Coated. Choker “Pass Thru” Style with Large O-ring at one end and Small O-Ring at other end (ANSI) Key Features DESIGN: Made of PVC coated Galvanised steel wire rope anchorage sling having one side Forged O-ring...

DESIGN: Roof top anchor device is designed to be fixed on metal standing seam and I beams to install horizontal life lines. Trolly lateral hinge (Swivel anchorage eye) on the top provides universal connection and is used as an anchorage point. The anchor is...

DESIGN: Parapet anchor with extended movable arm which allows installation on the parapet with moulding on outer edge. Anchor suitable to be installed on the parapet of a building such that the anchor point lies at the top on the outside facade of the...

DESIGN: Single point anchor is designed to be fixed on walls, ceilings, roof tops or steel structures. It can be used to sustain the load impact in all three axes (X, Y, & Z). NO. OF USERS: 1 Maximum MATERIAL: Alloy Steel; Finish: Silver/golden...

A removable and reusable anchor designed to work in 20mm (3/4”) drilled hole in concrete substrates. This portable concrete anchorage connector can be used in a variety of fall protection applications. SIZE: 3/4″ BREAKING STRENGTH: 5,000 lbf / 22kn COMPLIANCE: ANSI Z359.7 & CE-EN...

Anchor features 1-3/4" Kevlar® webbing and thread with Nomex® label cover Overmold insulated D-ring provides advanced Arc Flash hazard protection. Familiar cinch-loop design provides simple choke-on attachment For temporary reusable installation on properly rated structures Meets OSHA 1926.502 regulations Webbing Kevlar®; 5,000 lb min. static...

Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistance Appropriately sized alloy steel D-rings provide simple pass-through choke-on installation. May be passed-through multiple times to shorten length Smaller D-ring facilitates connection point for SRLs and lanyards Each D-ring termination features...

KStrong® Single Use Steel Roof Anchor (ANSI) Key Features DESIGN: An ideal Anchorage device to be fixed on wooden beams used in roofing. The D-Ring can be safely used as an Anchor point. MATERIAL: Alloy Steel. FINISH: Silver or golden yellow Zinc plated. MINIMUM...

For temporary use in existing openings during construction stages where doors and windows are not yet installed No tools required with simple clamp-in non-penetrating, non-marring installation. Features telescoping adjustment for openings from 21" to 51" wide Light weight extruded aluminum construction with durable steel...

The 3-Person Horizontal Lifeline System is a robust kit that offers enhanced fall arrest capabilities, ensuring the safety of multiple individuals working at heights. With the ability to support up to 3 workers simultaneously, it minimizes the risk of accidents and injuries by providing...

Features threaded aluminum crossbar and jaws with knurled rings for fine adjustment Exclusive recessed under-jaw ball bearings provide improved mobility. Fits beam flanges from 3" to 12-1/4" wide and up to 1" thick For temporary mobile use on horizontal I-beams Complies with ANSI Z359.18-2017...

Designed for under-tile roof ridge or field installation Features 17" stainless steel nailing plate with 2" connecting D-ring. Includes 16D stainless steel nails for installation to wood roof structures Meets OSHA 1926.502 regulations

Simple, lightweight design is easy to install and reusable Fits 1-5/8" wide strut material Features twin stainless steel plate design with plated alloy carabiner Provides horizontal mobility along overhead strut material Complies with ANSI Z359.18-2017 Type A

Features single trolley adjustment and threaded steel crossbar Includes steel wheels, side plates and adjustment rings. Fits beam flanges from 3" to 8" wide and up to 2-1/4" thick For temporary or permanent installation on overhead horizontal I-beams Complies with ANSI Z359.18-2017

Features aluminum crossbar and steel clamping jaws with nylon slider pads Fits beam flanges from 3" to 14-1/2" wide and up to 1-1/4" thick. Single adjusting jaw includes concealed locking latch Alloy steel D-ring slides with jaw adjustment For temporary mobile use on horizontal...

Pour-in-place installation for attachment to embedded rebar Features dual-layer jacketed web for abrasion resistance and plated alloy steel D-ring. For loop-over or choke-on installation to rebar during concrete pour Remove and dispose after temporary use in cured concrete Meets OSHA 1926.502 regulations

he KStrong® Bully™ Swivel 10K Anchor for metal structures is a high-strength anchor designed to provide maximum safety and security for those working at height. This anchor features a 5/8-inch hex head bolt that is 4 inches long, along with a nut and washer...

• Rated For 2 Workers In Fall Arrest• “0 Fall Factor”• Eliminates Free Fall And Swing Fall• High-Quality Steel Construction• 360° Rotation• Mounts To Concrete Walls Or Columns To Hold Alsipercha System• Built-In Energy Absorber• Provides A Safe Working Radius Of Over 21’• Designed...

• Rated For 2 Workers In Fall Arrest• “0 Fall Factor”• Eliminates Free Fall And Swing Fall• High-Quality Elastic Steel• 360° Rotation• Built-In Energy Absorber• Provides A Safe Working Radius Of Over 21’• Can Be Relocated With A Standard Forklift• Meets Compliance: OSHA 1926.502;...

• Rated For 2 Workers In Fall Arrest• “0 Fall Factor”• Eliminates Free Fall And Swing Fall• High-Quality Elastic Steel• 360° Rotation• Built-In Energy Absorber• Safe Working Radius Of Over 21’• Versatile Without Anchoring• Meets Compliance: OSHA 1926.502; ANSI Z359.1; CSA 259 And Military...